Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Fillmore, CA
Chimney work in Fillmore means working on older homes, most built before the 1960s, with original brick chimneys that have seen decades of fires during the Santa Clara River Valley’s cool, wet winters. Those conditions produce a specific kind of heavy creosote, the tar-like buildup that causes chimney fires, and aging mortar joints that need attention before they let water into the house. Whether you need a sweeping, an inspection, or gas fireplace work, call us at (559) 282-2695 and we’ll send a technician whose name and photo you’ll have before we arrive.
Why Fillmore Homes Are Different
Fillmore’s housing stock tilts older than most of Ventura County. You see early 20th-century bungalows and Craftsman homes around the historic downtown, plus mid-century ranch houses climbing toward the foothills. Many of those homes still have their original masonry chimneys, and brick and mortar don’t age gracefully when they’ve been absorbing decades of heat from winter fires. The mortar between bricks dries out and crumbles, which lets moisture in and weakens the whole structure.
Fillmore’s mild, wet winters and occasional Santa Ana wind events push fireplaces into regular use from November through March. That adds up to creosote accumulation faster than homeowners expect, especially in chimneys that haven’t been checked in years. Homes in the historic downtown area often have narrow flues and outdated dampers, which means standard off-the-shelf brushes can scrape or damage the liner. Our technicians carry custom-sized brushes and adjust the approach to the chimney, not the other way around.
Styles & brands we work with
Our Main Fillmore Services
Most Fillmore homeowners call us first for two things: a thorough sweep to clear out creosote and debris, and an inspection to verify the chimney is safe to burn before the heating season starts.
Chimney Sweep in Fillmore
A proper sweep in Fillmore removes creosote and soot from the flue liner, smoke chamber, and damper, with drop cloths protecting your floors and a HEPA-filtered vacuum running the whole time. Because so many Fillmore homes have original brick chimneys with narrow flues, we size the brush to the flue rather than forcing a standard one through. After the sweep, we explain what we found in plain English, not trade jargon. See the full breakdown on our Chimney Sweep in Fillmore page.
Chimney Inspection in Fillmore
An inspection is the only way to know whether a chimney is safe to use, and for older Fillmore homes it catches problems like spalling brick, cracked flue tiles, and moisture intrusion before they become four-figure repairs. We use a camera to see what’s happening inside the flue where you can’t, and we show you the footage on the spot. If something needs attention, you’ll see it with your own eyes before any recommendation is made. Details are on our Chimney Inspection in Fillmore page.
Gas Fireplace Repair in Fillmore
Many Fillmore homes have gas fireplaces that were installed years ago and haven’t been serviced since. We repair ignition systems, replace thermocouples and thermopiles, clean burner assemblies, and get pilot lights standing reliably again. Because Fillmore’s gas fireplaces often sit inside older masonry chimneys, we also check the venting path for obstructions and damage. See Gas Fireplace Repair in Fillmore for a full rundown of what we cover.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Fillmore
We install and service professional-grade brands like HeatShield for resurfacing damaged flue liners, Gelco and Olympia Chimney caps and dampers, and Famco components. We stock common parts locally so most Fillmore jobs don’t wait on shipping. See our brands for the full list of what we carry.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Fillmore, CA
| Service | Typical range in Fillmore |
|---|---|
| Standard chimney sweep (Level 1) | $189 – $269 |
| Chimney sweep with heavy creosote buildup | $269 – $349 |
| Chimney inspection (visual, Level 1) | $129 – $199 |
| Chimney inspection with camera (Level 2) | $249 – $399 |
| Chimney cap installation (standard) | $189 – $329 |
| Chimney cap installation (custom or oversized flue) | $329 – $529 |
| Damper repair or replacement | $149 – $389 |
| Gas fireplace diagnostic and tune-up | $149 – $239 |
| Gas fireplace repair (common parts) | $199 – $399 |
| Gas fireplace repair (major component) | $399 – $699 |
Heavy creosote, narrow flues in older Fillmore chimneys, and repairs uncovered during a sweep are the main things that push a job above the base price. You’ll get a written price before any work starts, so there are no surprises at the end.
Neighborhoods We Serve in Fillmore
We work across Fillmore and the surrounding foothill communities. Most jobs in the area are scheduled within a few days, and we coordinate routes from our Los Angeles office so our technicians arrive prepared with the right equipment for your chimney type.
- Historic Downtown Fillmore
- El Dorado Estates
- North Fillmore
- Lemonwood
- Rancho Sespe area
Service Area – Cities Near Fillmore
We also serve homeowners just outside Fillmore in Santa Paula, CA, Moorpark, CA, Somis, CA, and Simi Valley, CA. If you’re nearby and aren’t sure whether we cover your street, call (559) 282-2695 and a live person will confirm it.
Serving Fillmore, CA - Our Local Coverage Area
We’re based in the Fillmore area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Fillmore
Most Fillmore jobs are scheduled within a few days. Before the technician arrives, you’ll receive their name and photo by text or email, and they’ll show a photo ID badge at the door. Call (559) 282-2695 and we’ll find the earliest available slot for your street.
Routine sweeps and inspections never require a permit. Structural repairs or liner replacements may, depending on the scope and Fillmore’s current building code requirements. We’ll tell you during the estimate whether anything we’re recommending would need city approval, and what that process looks like.
Yes, our service area includes the entire Fillmore area, from the historic downtown to the foothill neighborhoods and the Rancho Sespe region. If you’re on a longer driveway or a hillside lot, just mention that when you call and we’ll plan for the access.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Fillmore Customers Say
"Having a vetted person in the house was why we picked them. Background checked, badge, polite. The fireplace has never been cleaner."
- Nadine F."Cap, screen, and a full inspection with photos sent to my phone. Easy to understand and a fair price."
- Tomas Y."Gas fireplace pilot kept going out. Cleaned the burner, replaced the thermocouple, and explained what failed. Works first try now."
- Alicia R.